Holland FW3110 - Manual (Page 2)

2 XL-FW1114-01 Rev. A
1. Component Part Identification and Specifications
1.1 Identification of Component Parts (Standard Greased FW3510 Shown)
1.2 Important Specifications
Release
Handle
Spring
Yoke
Lock Jaws
Lock Pin
Grease Fittings
Cam Plate
Adjustment
Bolt and Nut
Grease
Grooves
Lock Pins
Lock Jaws
Release
Handle
Lock
Bar
Release
Handle
“Weightsaver”
Mounting Bracket
"H"
Fifth Wheel Model
No. **
12° min. 12° min.
“ISO/DIN”
Mounting Bracket
"H"
Fifth Wheel Model
No. **
FW3510-150 150 kN 20 tonne 150 mm
FW3510-180 150 kN 20 tonne 180 mm
FW3510-200 150 kN 20 tonne 200 mm
15° min. 15° min.
Max. Fifth Wheel
D-Value Vertical Load Height* "H"
FW3510-140 150 kN 20 tonne 140 mm
FW3510-160 150 kN 20 tonne 160 mm
FW3510-190 150 kN 20 tonne 190 mm
FW3510-230 150 kN 20 tonne 230 mm
* Fifth Wheel Height "H" Does Not Include Mounting Plate Thickness.
** For the low lube version replace the "35" with "34" (i.e. FW3410-150);
for the no lube version replace the "35" with "31" (i.e. FW3110-150).
Max. Fifth Wheel
D-Value Vertical Load Height*
* Fifth Wheel Height "H" Does Not Include Mounting Plate Thickness.
** For the low lube version replace the "35" with "34" (i.e. FW3410-150);
for the no lube version replace the "35" with "31" (i.e. FW3110-150).
"H"