Harbor Freight Tools 99925 - Manual (Page 4)

SKU 99925 For technical questions, please call 1-800-444-3353. Page 4
maintain tools. check for mis- e.
alignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
tool’s operation. if damaged, have
the tool repaired before use. Many
accidents are caused by poorly main-
tained tools.
use the tool in accordance with
f.
these instructions, taking into ac-
count the working conditions and
the work to be performed. Use of
the tool for operations different from
those intended could result in a haz-
ardous situation.
service
5.
have your tool serviced by a quali- a.
fied repair person using only iden-
tical replacement parts. This will
ensure that the safety of the tool is
maintained.
air compressor safety Warnings
Risk of fire or explosion - do not 1.
spray flammable liquid in a confined
area or towards a hot surface. Spray
area must be well-ventilated. Do not
smoke while spraying or spray where
spark or flame is present. Arcing
parts - keep compressor at least 20
feet away from explosive vapors,
such as when spraying with a spray
gun.
Risk of bursting - do not adjust
2.
regulator to result in output pressure
greater than marked maximum pres-
sure of attachment.
Risk of injury - do not direct air
3.
stream at body. To reduce the risk of
electric shock, do not expose to rain.
Store indoors.
Do not use to supply breathing air. 4.
Do not direct air flow from the Com- 5.
pressor at people or animals.
Industrial applications must follow
6.
OSHA requirements.
Maintain labels and nameplates on
7.
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare
8.
to begin work before turning on the
tool.
Do not leave the tool unattended
9.
when it is plugged into an electrical
outlet. Turn off the tool, and unplug it
from its electrical outlet before leav-
ing.
This product is not a toy. Keep it out
10.
of reach of children.
WARNING: The brass components
11.
of this product contain lead, a chemi-
cal known to the State of California
to cause birth defects (or other repro-
ductive harm). (California Health &
Safety code § 25249.5, et seq.)
People with pacemakers should
12.
consult their physician(s) before use.
Electromagnetic fields in close prox-
imity to heart pacemaker could cause
pacemaker interference or pacemak-
er failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Do not use with power switch locked
on.
• Properly maintain and inspect to
avoid electrical shock.
• Any power cord must be properly
grounded. Ground Fault Circuit Inter-