HP 410 - Manual (Page 30)

hp digital copier printer 410
chapter 5
26
clean the print cartridges
Use this feature when the Self-Test Report shows streaking or white lines through
any of the colored bars. Do not clean print cartridges unnecessarily. The cleaning
function uses ink and shortens the life of the print cartridge.
1 Press Menu.
2 Press 3, and then press 1.
This selects the Maintenance menu and then selects the Clean Print
Cartridges option.
If the copy or print quality still seems poor after you clean the print
cartridges, replace the print cartridge that is affected.
set the language and country/region
Usually, the language and country/region are set when you install the HP Digital
Copier Printer. If you set the country/region or language incorrectly during
installation, use the following procedure to change the setting.
1 Press Menu.
2 Press 3, and then press 4.
This selects Maintenance and then selects Set Language & Country/Region.
You are prompted with a list of languages. You can also scroll through the
languages using
or .
3 Using the keypad, enter the two-digit number for the desired language.
4 When prompted, press 1 for Yes or 2 for No to confirm the language.
You are prompted with all the countries/regions for the selected language.
You can also scroll through the countries/regions using
or .
5 Using the keypad, enter the two-digit number for the desired country/
region.
6 When prompted, press 1 for Yes or 2 for No to confirm the country/region.
7 You can confirm the language and country/region by printing a Self-Test
Report, as follows:
a. Press Menu.
b. Press 2, and then press 2.
This selects Print Report and then selects Self-Test Report.
set the power save time
The bulb in your HP Digital Copier Printer remains on for a specified period so
that the unit is ready to respond to your request immediately. When the
HP Digital Copier Printer has not been used within that specified period, it turns
the bulb off to preserve power and displays Power Save On in the front-panel
display. (You can exit this mode by pressing any button on the front-panel.)
Your unit is automatically set to enter power-save mode after 12 hours. Follow
these steps if you want the HP Digital Copier Printer to enter this mode earlier.