Hearth and Home Technologies Heat & Glo Twilight II-B - Manual (Page 26)

Heat & Glo LifeStyle Collection • Twilight-II-B • 2108-900 Rev. G • 8/07 26
STEP 4.
LOG #3 (SRV2005-702): Position log #3 as shown by leaning it against log # 2 and resting the other end on
the peak of the burner. Do not cover any port holes.
STEP 5.
LOG #4 (SRV2005-703): Locate the sharp notch on log #4 against the grate tine as shown. The smooth cutout
on log #4 should rest on the burner surface. As with log #3, be careful not to cover any port holes.
STEP 6.
LOG #5 (SRV2005-704): Using the sharp notch on the heavy end of log #5, align it on the grate tine and on
log #4 as shown.
3
4
5
Sharp
Notch
Sharp
Notch
Smooth Cutout
2
1
3
2 1
1