Harbor Freight Tools 44716 - Manual (Page 5)

Page 5 SKU 44716 For technical questions, please call 1-800-444-3353.
AIR CONNECTION
Note: Air Compressor is not supplied.
1. Acquire a Union fitting (not supplied) and screw into the Air Inlet fitting.
Tighten with the wrench.
2. Attach a quick-coupler (not supplied) to the Union fitting if desired. This
allows quick exchange of the Air Hose to other air tools.
3. Connect the Air Hose to the Air Inlet Coupling.
Warning: Follow all air compressor warnings before using tool.
This air tool requires lubrication during operation. For best results, it is recom-
mended to have an oiler and water filter in line with the air supply as shown on
Page 6. This will extend the life of the tool.
UNPACKING
When unpacking, check to make sure all parts listed on Page 8 are included.
If any parts are missing or broken, please call Harbor Freight Tools at the
number on the cover of this manual.
5. Include vibration-free periods each day of work.
6. Grip tool as lightly as possible (while still keeping safe control of it). Let
the tool do the work.
7. To reduce vibration, maintain the tool as explained in this manual. If any
abnormal vibration occurs, stop use immediately.
Rev 07i