Harbor Freight Tools 96451 - Manual (Page 2)

Page 2 For technical questions, please call 1-800-444-3353. SKU 96451
Specifications
Measurement
Range
-4ºF to 968ºF
(-20ºC to 520ºC)
Accuracy
± 4ºF below 212ºF
± 2% reading above 212ºF
Response Time 500 mSec
Spot Size Ratio 8:1 (Distance : Spot size)
Needed Battery 9V
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
Max. Output: <5 mW,
Wavelength: 630-660 nm
CLASS IIIa LASER PRODUCT
WARNING
To prevent serious injury:
Do not use for medical purposes.
This product complies with 21 CFR 1040.10 and 1040.11
Diode Mfr.: Zhangzhou Easter Intelligent Meter Co., Ltd
Zhangzhou City, Fujian, China
Manufacture Date: DO NOT REMOVE
11g Made in
China
Save This Manual
Keep this manual for the safety warnings and
precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write
the product’s serial number in the back of the
manual near the assembly diagram (or month
and year of purchase if product has no
number). Keep this manual and the receipt
in a safe and dry place for future reference.
Important Safety Information
In this manual, on the labeling, and all other
information provided with this product:
This is the safety alert symbol.
It is used to alert you to potential
personal injury hazards. Obey
all safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates a hazardous
situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety alert
symbol, indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
NOTICE is used to address practices
not related to personal injury.
CAUTION, without the safety alert
symbol, is used to address practices
not related to personal injury.
General Power Tool
Safety Warnings
WARNING Read all safety warnings
and instructions. Failure to follow the
warnings and instructions may result in
serious injury.
Save all warnings and instructions
for future reference.
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Keep children and bystanders
away while operating the tool.
Distractions can cause you to lose control.
3. Do not expose the tool to
rain or wet conditions.
4. Stay alert, watch what you are doing and
use common sense when operating the
tool. Do not use while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
may result in serious personal injury.