Husqvarna 345FX - Manual (Page 33)

English – 33
TECHNICAL DATA
Technical data
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
343R 345RX 343F
Engine
Cylinder displacement, cu.in/cm
3
2,75/45 2,75/45 2,75/45
Cylinder bore, inch/mm 1,65/42 1,65/42 1,65/42
Stroke, inch/mm 1,26/32 1,26/32 1,26/32
Idle speed, rpm 2800 2800 2800
Recommended max. speed, rpm 12500 12500 13500
Speed of output shaft, rpm 9000 9000 10500
Max. engine output, acc. to ISO 8893, kW/ rpm 2,0/9000 2,0/9000 2,0/9000
Catalytic converter muffler No Yes No
Ignition system
Manufacturer/type of ignition system SEM AM SEM AM SEM AM
Spark plug Champion RCJ 6Y Champion RCJ 6Y Champion RCJ 6Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q Zama C1Q Zama C1Q
Fuel tank capacity, US pint/litre 1,9/0,9 1,9/0,9 1,9/0,9
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 18,0/8,2 17,4/7,9 17,4/7,9
Sound levels
(see note 1)
Equivalent sound pressure level at the user ′s ear, measured
according to ANSI B175.3-1997, dB(A), min/max:
99/104 99/104 99/104
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s
2
At idle, left/right handles, min.: 3,7/4,5 2,5/2,8 3,7/4,5
At idle, left/right handles, max.: 4,0/4,7 3,0/3,9 4,0/4,7
At max. speed, left/right handles, min.: 2,1/2,3 0,8/1,2 2,1/2,3
At max. speed, left/right handles, max.: 2,5/2,7 1,2/1,9 2,5/2,7