HONDA HHT35S - Manual (Page 9)

9
CONTROLS AND EQUIPMENT
COMPONENT CONTROLS AND LOCATIONS
Loop Type Handle
U-Type Handlebar
This type is supplied with a cutting-line head, a saw blade, and two
debris shields.
Engine
CONTROLS
The location and operation of the controls are similar on both the
HHT25S and HHT35S models.
Choke Lever
The choke lever opens and closes the choke valve.
The CLOSED position enriches the fuel mixture for starting a cold
engine.
The OPEN position provides the correct fuel mixture for operation
after starting, and for restarting a warm engine.
HARNESS HANGER
DEBRIS SHIELD
WITH CUTOFF KNIFE
DRIVE CABLE
FRAME PIPE
LOOP HANDLE
THROTTLE SET BUTTON
OPERATOR
PRESENCE
LEVER
THROTTLE
TRIGGER
IGNITION SWITCH
CUTTING-LINE HEAD
GEAR CASE
GEAR CASE
IGNITION SWITCH
THROTTLE
TRIGGER
SAW BLADE
OPERATOR
PRESENCE
LEVER
HARNESS
HANGER
DRIVE CABLE
FRAME PIPE
U-TYPE
HANDLEBAR
THROTTLE
SET BUTTON
DEBRIS SHIELD
FOR BRUSH/
WOOD BLADE
CUTTING-LINE HEAD
DEBRIS SHIELD WITH
CUTTING KNIFE
SPARK PLUG
AIR
CLEANER
COVER
PRIMING
BULB
OIL FILLER CAP
STARTER
GRIP
SPARK
ARRESTER
FUEL RETURN
TUBE (CLEAR)
FUEL SUPPLY
TUBE (BLACK)
FUEL TANK CAP
CHOKE
LEVER
CHOKE LEVER
CLOSED
OPEN