HONDA HHT35S - Manual (Page 12)

12
Cutting Attachment Inspection
• Look for signs of damage to the cutting attachment (see page 19
and page 22). Replace any cutting attachment and parts that are
worn out, bent, cracked, chipped, or damaged in any way.
• If using a metal blade, be sure it is sharp. A dull blade is more likely
to snag and thrust.
• If using a metal blade on a trimmer equipped with a loop handle, be
sure the barrier bar (optional part) is installed beneath the loop
handle.
• Make sure the cutting attachment is properly installed and securely
fastened (see page 22 and page 23).
• Check that the debris shield is the correct shield for the cutting
attachment (see page 23), and that it is securely installed and in
good condition.
Maintenance Inspection
• Check the oil level (see page 17). Running the engine with a low oil
level can cause engine damage.
• Check the air filter (see page 18). A dirty air filter will restrict air flow
to the carburetor, reducing engine and trimmer performance.
• Check throttle cable free play (see page 18). The cable must be
correctly adjusted and operate smoothly for good throttle control.
• Check the fuel level (see page 24). Starting with a full tank will help
to eliminate or reduce operating interruptions for refueling.
ARE YOUR SHOULDER HARNESS AND
TRIMMER CORRECTLY ADJUSTED?
Adjusting the Harness
Adjust the harness so the quick-release latch is at your right hip, as
shown.
Balancing the Trimmer on the Shoulder Harness
Hang the trimmer on the harness hook, and see how it balances.
Adjust the shoulder harness, the harness hanger on the frame pipe,
and the loop handle or U-type handlebar, so the handle or handlebars
are in a comfortable operating position, and the trimmer hangs with its
cutting attachment a few inches above the ground (see page 14).
OPERATION
SAFE OPERATING PRECAUTIONS
Before operating the trimmer for the first time, please review the
IMPORTANT SAFETY INFORMATION section on page 2 and
BEFORE OPERATION section starting on page 8.
Even if you have operated other trimmers, take time to become
familiar with the operation of this trimmer’s controls and handling.
For your safety, avoid starting or operating the engine in an enclosed
area, such as a garage. Your engine's exhaust contains poisonous
carbon monoxide gas which can collect rapidly in an enclosed area
and cause illness or death.
If the trimmer starts to shake or vibrate, stop the engine immediately.
After the cutting head has completely stopped, inspect it to determine
the cause of the vibration. Sudden vibration is a sign of a hazardous
problem, such as a loose or damaged blade. Do not operate the
trimmer until the problem is corrected.
Prolonged exposure to vibration may cause vibration syndrome
(Raynaud's disease). Symptoms include loss of skin color in the
hands and numbness or a painful tingling sensation in the fingers,
hands, and arms. Regular users of any power equipment may feel the
numbness or pain spontaneously, at any time, not just after using the
equipment. If any of these symptoms occur, see a physician
immediately.
FULL SHOULDER
HARNESS
QUICK-RELEASE
LATCH
SINGLE-STRAP
SHOULDER HARNESS
GROUND
A few inches above the
ground