HONDA HHT35S - Manual (Page 32)

32
To Obtain Warranty Service:
You must take your Honda Power Equipment engine or the product on which it
is installed, along with your warranty registration card or other proof of original
purchase date, at your expense, to any Honda Power Equipment dealer who is
authorized by Honda to sell and service that Honda product during his normal
business hours. Claims for repair or adjustment found to be caused solely by
defects in material or workmanship will not be denied because the engine was
not properly maintained and used.
If you are unable to obtain warranty service or are dissatisfied with the
warranty service you received, contact the owner of the dealership involved.
Normally this should resolve your problem. However, if you require further
assistance, write or call the Power Equipment Customer Relations Department
of American Honda Motor Co., Inc. Refer to page 29 for contact information.
Exclusions:
Failures other than those resulting from defects in material or workmanship are
not covered by this warranty. This warranty does not extend to emission
control systems or parts which are affected or damaged by owner abuse,
neglect, improper maintenance, misuse, misfueling, improper storage,
accident and/or collision, the incorporation of, or any use of, any add-on or
modified parts, unsuitable attachments, or the unauthorized alteration of any
part.
This warranty does not cover replacement of expendable maintenance items
made in connection with required maintenance services after the item's first
scheduled replacement as listed in the maintenance section of the product
owner's manual, such as: spark plugs and filters.
Disclaimer of Consequential Damage and Limitation of Implied
Warranties:
American Honda Motor Co., Inc. and Honda Canada Inc. disclaim any
responsibility for incidental or consequential damages such as loss of time or
the use of the power equipment, or any commercial loss due to the failure of
the equipment; and any implied warranties are limited to the duration of this
written warranty. This warranty is applicable only where the California, U.S.
EPA, or Environment Canada Emission Control System Warranty regulation is
in effect.
Emission Control System Warranty Parts:
QUICK REFERENCE INFORMATION
SYSTEMS COVERED
BY THIS WARRANTY
PARTS DESCRIPTION
Fuel Metering Carburetor assembly, (includes starting enrichment
system), Engine temperature sensor, Engine
control module, Fuel regulator, Intake manifold
Evaporative Fuel tank, Fuel cap, Fuel hoses, Vapor hoses,
Carbon canister, Canister mounting brackets, Fuel
strainer, Fuel cock, Fuel pump, Fuel hose joint,
Canister purge hose joint
Exhaust Catalyst, Exhaust manifold
Air Induction Air filter housing, Air filter element *
Ignition Flywheel magneto, Ignition pulse generator,
Crankshaft position sensor, Power coil, Ignition coil
assembly, Ignition control module, Spark plug cap,
Spark plug *
Crankcase Emission
Control Crankcase breather tube, Oil filler cap
Miscellaneous Parts Tubing, fittings, seals, gaskets, and clamps
associated with these listed systems
* Covered up to the first required replacement only. See the Maintenance
Schedule on page 17.
Note: This list applies to parts supplied by Honda and does not cover parts
supplied by the equipment manufacturer. Please see the original
equipment manufacturer’s emissions warranty for non-Honda parts.
Fuel Type
Unleaded gasoline with a pump
octane rating of 86 or higher
(page 24)
Engine oil Type
SAE 10W-30, API SJ or later
(page 18)
Spark plug Type NGK: CMR5HSB
Maintenance
Before each
use
Check engine oil (page 17)
Check air filter (page 18)
Check throttle cable (page 18)
Check cutting attachment
(page 19 and page 22)
Check debris shield (page 19)
Check nuts, bolts, fasteners
Check shoulder harness, quick
release (page 14)
First 10
hours
Change engine oil (page 17)
Subsequent
Refer to the Maintenance
Schedule (page 17)
Printed on
Recycled Paper