Havis-Shields Telescoping Computer Base C-TCB-12 - Manual

C-TCB-12-INST-7-05
INSTALL INSTRUCTIONS C-TCB-12
TELESCOPING COMPUTER BASE
1992-1996 FORD BRONCO
TOOLS REQUIRED:
3/16” Allen wrench
3/8” Standard socket set
3/8” Torx set 3/8” Ratcheting wrench
Open-end wrench set
Powered drill w/ 3/8” drill bit
HARDWARE & COMPONENTS:
QTY DESCRIPTION PART
#
1 Pole support assembly CM93071-12
1 Telescoping pole assembly CM93072-3
1 Side support brace CM93162
1 5/16-18 Nylock nut GSM30017
1 5/16” Flat washer GSM31006
2 ¼ x 1Hex head lag bolt GSM33060
Side support brace
Pole support
assembly
Telescoping pole
assembly
¼” x ¾”Hex
head lag bolts
5/16-18 Nylock
nut