Preparation prior to use – haier AFL631CB User Manual
Page 11
Preparation prior to use
Remove all package parts
Please also remove the foam base and the adhesive tape fixing accessories.
Check accompanying accessories and documents
Check the items inside the package box against the
Packing List. Please inquire with the purchase shop if
there is any discrepancy.
Install the handles
(
) Take out the two handles from the
accessory box and insert them in the handle seats
respectively as shown in the figure. Secure the
handles on the doors with the supplied (4) screws
from bottom to upper direction.
AFT63
0IX/ AFT630IB
AFL631CB/AFL631CS/AFD631CX/AFD631CB/A
FD631CS/AFD630IX/AFD630IB/AFD630IS/
Move the refrigerator into a proper location
(See section “Placing environment”)
It is advisable to clean the cabinet before use
Please clean the inside and outside of the refrigerator with
water before putting into any food in it.
Idle standing
After the appliance has been leveled and cleaned, let it
remain idle for at least 6 hours before switching it on so as to
ensure its normal running.
8