HONDA HHE31C - Manual (Page 7)

STICK EDGER SAFETY
5
ATTACHMENTS & MODIFICATIONS
Modifying your stick edger, or installing some
non-Honda attachments, can make your stick
edger unsafe. Before you make any
modifications or install any attachments, be
sure to read the following information.
Attachments
Non-Honda attachments are usually designed
for universal applications. Although aftermarket
attachments may fit on your stick edger, they
may not meet factory specifications and could
make your stick edger unsafe.
Modifications
Do not remove the debris shield or modify your
stick edger in any way that would alter its
design or operation. This could make your stick
edger unsafe.
IMPORTANT MESSAGE TO EMPLOYERS
As an employer, you have special
responsibilities to the people who work for you.
Before you ask anyone to operate this stick
edger, you need to determine whether the
person is old enough, large enough, and strong
enough to safely handle and control the
stick edger.
If you decide they are, make sure the employee
reads and understands all instructions and
warnings in this manual and on the labels
before operating the stick edger.
Allow adequate time for hands-on training by a
qualified instructor, and personally supervise
practice sessions, until you feel sure the
employee is ready to operate the stick edger.
Also be sure employees wear proper clothing,
eye and hearing protection, and any other gear
that may be required by local ordinances or
your insurance company.
Remember, too, that you are responsible for
keeping the stick edger properly maintained
and in safe operating condition.
Your commitment to safety on the job can help
prevent accidents and result in longer and more
productive years of service.