HP 320 - Manual (Page 15)

1-Getting started 13
Choosing the language
The first time you turn the camera on,
the following screen appears and
prompts you to choose a language.
1 Scroll to the language that you
want by using the
Arrow Arrow Arrow Arrow
buttons.
2 Press to select the highlighted
language.
Setting the date and time
1 Press repeatedly until your
preferred date format appears
(M = month, D = day, Y = year).
Press the right
Arrow Arrow Arrow Arrow button to
highlight the date.
2 Press to select the first value,
and then use the buttons to
change it. Press to confirm. Set the remaining values in
the same way.
3 Press the button to highlight the time format, and then
press
if you want to change it.
4 Press the button to highlight the time. Set the time values
in the same way you set the date values in step 2.
5 When finished setting the date and time, press the button
to highlight
Exit Exit Exit Exit , and then press .
If the batteries are removed from the camera for longer than
ten minutes, you might need to reset the date and time. For
more information about batteries, see
Appendix A: Batteries Appendix A: Batteries Appendix A: Batteries Appendix A: Batteries
and accessories and accessories and accessories and accessories on page 59.