Harbor Freight Tools ROTARY HAMMER 94944 - Manual (Page 8)

SKU 94944 PAGE 8
SYMBOLOGY
V ~
A
xxxx/min.
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM) no
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Rotary Hammer. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2. Industrial applications must follow OSHA requirements.
3. Check for damaged parts. Before using this product, carefully check that it will
operate properly and perform its intended function. Check for damaged parts and
any other conditions that may affect the operation of this product. Replace or repair
damaged or worn parts immediately.
4. Always disconnect the Rotary Hammer from its electrical outlet before
performing any service, maintenance, or cleaning such as leaving the work
area, moving the tool from one location to another, changing chisels, cleaning dirt
off the unit, etcetera.
5. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California) to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
(a) Lead from lead-based paints;
(b) Crystalline silica from bricks and cement or other masonry products;
(c) Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals; work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles. (California Health & Safety
Code 25249.5, et seq.)