Holux M-241 - Manual (Page 17)

HOLUX Wireless GPS Logger M-241 User’s Manual
17
Menu: Select “Point” or “Route”
Enter: Setting and back to Setting mode
NOTE:
1.
When the user select the “Point” logging method, the logged
distance is the straight line distance between the starting point
and the end point.
2. If the “Route” logging method is selected , the logged distance
will be the accumulated distance of each segment between the
log points. However, because the distance between any two log
points may have error, the accumulated distance value may
have increased error with the increase of the number of the log
points.
Menu: Go to Log record mode menu of Setting mode
Enter: Go to select “km” or “mile”
Note: “km/mile” signifies that the Units of Measure Distance and show
speed are “km” or “mile”.
Menu: Select “km” or “mile”
Enter: Setting and back to Setting mode