Rear panel – HP KSC-570 User Manual
Page 11
6
DIGITAL SATELLITE RECEIVER
Rear Panel
1. POWER SUPPLY
90 ~ 250V AC, 50/60Hz.
2. S/PDIF
Output for connection to a digital amplifier.
3. SCART FOR VCR
Connect this port to the VCR via SCART cable.
4. SCART FOR TV
Connect this port to the TV via SCART cable.
5. VIDEO
Video connection port to the TV or other equipment.
6. AUDIO
Audio connection port to the TV or other equipment.
7. 0/12V
To connect 12V to an external 0/12V switch.
8. TV OUT
To connect a TV via a coaxial cable.
9. ANT IN
To connect to television antenna input.
10. RS-232
To connect to a personal computer for software upgrade.
11. LNB
To connect to a satellite antenna and cable jacks.
12. LOOP THROUGH
Used to connect a RF signal from the STB to either the RF
input jack on your television or to the STB.
k1.5 500 SAT(Eng) 1/5/06 5:52 PM ˘
` 6 mac-4 HP LaserJet 5100 Series T