Connecting your camera as a digital camera, Using your camera without installing the, Hp image zone software – HP Photosmart E317 User Manual
Page 77: Transferring images to a computer without, Connecting your camera as a, Digital camera, See using your
77
Troubleshooting and Support
Using Your Camera without
Installing the HP Image Zone
Software
You can still transfer images and video clips from the camera
to your computer without installing either HP Image Zone or
HP Image Zone Express. However, the process for
transferring will be different, since normally the HP Image
Zone software handles this task. See the following section for
details.
Transferring Images to a Computer
without HP Image Zone Software
If you do not, or cannot, install HP Image Zone on your
computer, there are three ways to transfer images from your
camera to the computer:
• Connect your camera to the computer as a Digital
Camera (Windows XP or Mac OS X only)
• Use a memory card reader
• Configure the camera as a disk drive
Connecting Your Camera as a Digital
Camera
If you have a Windows XP system, or a Mac OS X system,
simply connect the camera to your computer directly, and the
operating system will launch a program to help you transfer
images. Check that your camera USB Configuration in the
Setup Menu is set to Digital Camera, and connect the
camera to your computer with the USB cable.