Hunter Fan 36205 - Manual (Page 5)

41787 04/28/2006 © 2006 Hunter Fan Company 5
operating Your humidifier
Functional Buttons
There are 6 buttons to control the functions
of the humidifier. You will hear a
confirmation ‘beep’ when a button is
pressed.
1. PoWeR – Press the POWER button
to set the humidifier to HI. Press
the POWER button again to turn the
unit OFF.
a. When initially turned ON after being
plugged in, the humidifier will
‘beep’ and all icons on the screen
will be temporarily illuminated.
After a few seconds, the LCD icons
will turn OFF, and the unit will be
in standby mode with the backlight
OFF.
b. Pressing POWER once will set the
unit to HI and turn the backlight
ON. The LCD screen will display the
Continue message (“CO %") which
means the unit will be continuously
on HI until set otherwise. After
a few seconds, the current room
humidity and the ROOM message
will be displayed.
c. If the unit is plugged in and has
been turned ON once, turning the
unit OFF and back ON will display
the Relative Humidity (RH) value last
used.
d. When the unit is ON, all backlights
will remain ON.
2. SeTTInG – The humidifier has two
settings: HI and LOW. Press the
SETTING button and the unit will
loop settings (HI-LOW-HI) while the
respective icon is illuminated.
3. uP – Each time the UP button is
pressed, the RH value will increase
by 5 %.
4. doWn – Each time the DOWN
button is pressed, the RH value will
decrease by 5 %.
5. ReSeT – When the water level is
too low, the unit will turn itself
OFF. Pressing the RESET button will
reactivate the unit after you have
refilled the tank.
6. nITe GLo™ – Press the NITE GLO
button to turn the blue night light
ON or OFF.
UP
DOWN
SETTING
RESET
POWER
LIGHT
ENGLISH