Holux M-215 - Manual (Page 14)

HOLUX Wireless GPS Receiver M-215 User’s Manual
14
10.2 Installation
I. Starts the driver installer from driver CD.
II. Connect M-215 to computer. System will search new hardware and install
the driver automatically.
III. Install the USB driver “CP210x_VCP_Win2K_XP.exe ” from the CD provided
in the package.
IV. Click <Start> menu, select → <Setting>, then enter→ <Controller>
V. After entering <Controller>, and select <System>.
VI. Select <Device Manager>.
VII. Find the < Connector (COM & LPT)> and check the Virtual COM Port,
which was created by the USB driver.
* Please note that the virtual COM port
number might be different on every
computer. Before using navigation software,
please confirm the COM Port
numbers
created by your computer and provided by
your navigation software. Otherwise, the
navigating software won’t receive the
satellite signal, because of the un-match
COM Port setting.