Hamilton Watch Multi Touch Watch - Manual (Page 3)

5 4
1"
5"
Activation of the glass
Using pushers and ,
bring the 2 hands precisely to
12 o'clock
Incrementation of the minute
hand (3 steps = 1 minute)
Incrementation of the hour
hand (3 steps = 1 minute)
Validation of the setting
Selecting the "Units" mode
(1) Procedure allowing the digital display to be synchronised
with the hands.
Note: it is not necessary to perform this synchronisation
operation when the digital display and the hands show
the same time.
h-m-s
date
units
1"
(1)
(2)
Activation of the glass
Selecting the display mode
Return to h-m-s mode
(1) The "h-m-s" and "date" modes remain active.
(2) The "units" mode is a temporary setting mode.
(3) This procedure is valid when the glass
is activated for the ALTIMETER, CHRONO,
COMPASS, ALARM, THERMOMETER and BAROMETER functions.
(3)
(1)
h-m-s/date/units
(1) S Y N C H R O N I S A T I O N D I S P L A Y M O D E
Manuel Ham_GB_2e manuel.qnx 1.10.2001 16:22 Page 4