Husqvarna HUV4421G - Manual (Page 12)

General Information
Page 10 2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
GENERAL INFORMATION
This manual includes operating procedures, maintenance, and regular servicing information for HUV 4421G,
HUV 4421D, HUV 4421GXP, and HUV 4421DXP gasoline and diesel vehicles. All operating procedures,
maintenance, and regular servicing are identical unless otherwise noted.
MODEL IDENTIFICATION
The serial number of each vehicle is printed on a bar code decal mounted on the frame above the brake pedal
(Example: RC0601-123456) (Figure 3). There is also a second serial number decal mounted on the rear
body frame behind the fuel tank. The fuel tank must be removed to view this decal. See following NOTE.
NOTE: Have the vehicle serial number available when ordering parts or making inquiries.
CONTROLS AND INDICATORS
See General Warnings on page 8.
ý WARNING
• Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls
and operating procedures.
• Do not tamper with the high idle speed setting on the diesel vehicle. Doing so will void the
warranty, as well as damage the engine and other components, and could result in property
damage, personal injury, or death due to unsafe speeds.
• Do not shift the Forward/Reverse handle while the vehicle is in motion.
• Engine must be at idle before shifting the Forward/Reverse handle. Failure to do so may result
in injury to inattentive passengers and (or) damage to the vehicle.
• To avoid unintentionally starting or rolling the vehicle, place attachment on the ground, set
the park brake, place the Forward/Reverse handle in the NEUTRAL position, turn the key
switch to the OFF position, and remove the key when leaving the vehicle.
Figure 3 Serial Number
SERIAL NUMBER
DH0601-123456
7349 STATESVILLE RD.
CHARLOTTE, NC 28269