Hustler Turf 108277 - Manual (Page 109)

9-39 108277 10/08
18. Tighten the hardware holding the chain and adjuster onto the deck lift arm.
19. Go to the right rear of the tractor.
20. Make sure that there is still slack in the chain. If not, loosen the two nuts on the block
holding the threaded rod until there is slack in the deck lift chain (FIG. 75).
21. Tighten the appropriate nut until the chain just becomes tight, making sure that the deck
stays tight against the 3" block.
22. Tighten the other nut on the opposite side of the block, and jam them tightly together
against the block.
23. Go to the left rear of the tractor.
24. Make sure that there is still slack in the chain. If not, loosen the two nuts on the block
holding the threaded rod until there is slack in the deck lift chain (FIG. 73).
25. Tighten the appropriate nut until the chain just becomes tight.
26. Tighten the other nut on the opposite side of the block, and jam them tightly together
against the block.
FIG. 73 FIG. 74
FIG. 75 FIG. 76
FIG. 77
CHAINS
NUT
DECK LIFT THREADED ROD
DECK LIFT
CHAIN
NUT
NUT
THREADED ROD
HARDWARE
JAM NUT
5/16" BOLT
ADJUSTER
FOOT PEDAL
NUTS
Deck Lift
Assist Spring
Lift Block
½"
Deck Lift Rod
1"