Harman-Kardon CDR 2 - Manual (Page 19)

19 PROGRAM PLAY
Program Play
Repeat A-B
The CDR 2 may be programmed to repeat any
section within a track, or a complete passage
that includes material from a series of consecu-
tive tracks.
To program the unit for A-B Repeat play, first
play the disc and locate the point where you
wish to begin the repeated section. At the start
point, press the A-B Repeat button
q and
note that the Repeat Indicator D and the
Repeat-Status Indicator E will show an A
and flash. Let the disc play until the point at
which the section to be repeated will end. At
that end point, press the A-B Repeat button
q again and note that the Repeat-Status
Indicator
E will stop flashing and will light
showing Repeat A-B.
The unit will immediately begin to play the
section you have programmed, and continually
repeat it.
To resume normal play, press the A-B Repeat
button
q. The Repeat A-B Indicators
DE will go out, and the disc will continue
playing through to the end. Stopping the disc
or opening the disc drawer will automatically
cancel the Repeat A-B programming.