Hotpoint HTS93G - Manual (Page 7)

7
EN
Cleaning the carbon filter
It absorbs unpleasant odours caused by cooking.
The charcoal filter can be washed once every two
months (or when the filter saturation indication system
– if envisaged on the model in possession – indicates
this necessity) using hot water and a suitable
detergent, or in a dishwasher at 65°C (if the
dishwasher is used, select the full cycle function and
leave dishes out).
Eliminate excess water without damaging the filter,
then put it in the oven for 10 minutes at 100° C to dry
completely. Replace the mattress every 3 years and
when the cloth is damaged.
Mounting and changing the filter
Assembly
Place the mat around the grease filter and fix it in place
using the devices provided.
Position the upper cap and fix it in place using the
fixing pin.
To disassemble, perform the steps in the reverse
order.
Replacing lamps
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they
are cooled down.
1. Using a flat head screwdriver or equivalent tool,
carefully pry loose the light cover.
2. Remove the damaged light and replace with a new
12 Volt, 20 Watt (Maximum) halogen light made for
a G-4 base SUITABLE FOR USE IN OPEN
LUMINAIRES. Follow package directions and do
not touch new light with bare hands.
3. Reinstall the light cover. (it will snap shut).