Setting the flash, Red eye, Using the shooting modes – HP M527 User Manual

Page 15: Using the self-timer mode using the burst mode, Using

Advertising
background image

Note 2

Digital zoom reduces the resolution of an image, so your picture may be

more grainy than the same picture taken with optical zoom. When you need higher
quality, limit the use of digital zoom.

Setting the flash

To select a flash setting, press , use

to highlight the desired flash mode, then

press

.

Auto Flash (Default)—The camera uses the flash if necessary.

Red-Eye—The camera uses the flash with red-eye reduction, if necessary, to
minimize the possibility of human eyes appearing red in the final image. For
information about red-eye, see

Red eye on page 15

.

Flash On—The camera always uses flash. If the light is behind your subject,
use this setting to increase the light on the front of your subject.

Flash Off—The camera does not use flash. Use this setting to capture poorly
lit subjects beyond the flash range or to capture scenes with the existing light.

The Flash setting remains in effect until it is changed again, or you turn off the camera.

Note

The flash is not available in Burst, Fast Shot, Landscape, or Sunset

shooting modes, nor while recording video clips. In Night Portrait shooting mode,
the flash is set to

Red-Eye.

Red eye

The red-eye phenomenon is caused when light from the flash reflects off the subjects'
eyes, which can make human eyes appear red in the captured image. Using

Red-

Eye causes the camera to flash quickly up to three times to shrink the subject's pupils
(reducing the effect of the red-eye phenomenon) before using the main flash and
capturing the image. Since it takes longer to take a picture using this setting, make sure
your subjects wait for the additional flashes.

Using the shooting modes

Shooting modes are predefined settings for everyday situations. They are optimized for
particular types of scenes or shooting situations.

To select a shooting mode, press

while in Live View, use

to highlight a shooting

mode, then press

.

Auto Mode (Default)—For taking good shots quickly, when you do not have
time to select a special shooting mode.

Self-Timer—For capturing images or recording video after a 10-second delay
(see

Using the Self-Timer mode on page 16

).

Fast Shot—For taking images more quickly than in Auto mode in bright light
conditions when the subject is a moderate to long distance away.

HP Photosmart M527 Digital Camera

15

Advertising