Honeywell UV 100E - Manual (Page 7)

UV100E ULTRAVIOLET AIR TREATMENT SYSTEM
7 69-1442-1
6. Continue lightly pushing in on the lamp while rotating it slowly counterclockwise.
This should cause the lamp to drop into the bottom of the lamp well.
7. Rotate the lamp clockwise until it snaps into place with the lamp light indicator
aligned with the raised button on the unit cover.
WARNING
UV Light Hazard.
Harmful to bare skin and eyes.
Can cause temporary or permanent loss of vision.
Never look at the lamps while illuminated.
Only view illumination by way of the light indicator located on the lamp knob.
To prevent exposure to ultraviolet light, disconnect power to the ultraviolet air
treatment system before servicing any part of the heating/air conditioning
system.
8. Plug your ultraviolet air treatment system cord into the nearby 120 Vac electrical
outlet.
9. Verify that your ultraviolet lamp(s) are operating only by viewing through the
lamp light indicator on the lamp knob. Never look directly at your lamp(s) while
illuminated.
10. Reconnect the power to your HVAC system.
Table 1. Replacing Your Lamp(s).
Unit Description Replacement Lamps Wattage
UV100E1001 Single-Lamp
Return Air Unit UC100E1006 18W
UV100E1019 Dual-Lamp
Return Air Unit UC100E1014 (twin pack)
(two lamps required) 36W
UV100E1035 Coil Irradiation Unit UC100E1030 36W