Hitachi ELITEBOOK 2730P - Manual (Page 68)

Removal and replacement procedures
Maintenance and Service Guide 4–29
Ä CAUTION: The display assembly will be unsupported when the following screws are removed. To prevent damage to the
display assembly, support it before removing the screws.
8. Remove the four Phillips PM2.5×6.0 screws 1 that secure the display assembly to the computer. Be sure to
hold the display before removing the last screw to prevent damage to the display.
9. Lift the display assembly 2 straight up and remove it.
Reverse this procedure to install the display assembly.