Harbor Freight Tools Pacifichydrostar 68333 - Manual (Page 6)

Page 6 For technical questions, please call 1-800-444-3353. SKU 68333
Read the EntiRE imPORtant
SaFEty inFORmatiOn section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
tO PREvEnt SERiOuS injuRy FROm
aCCiDEntal OPERatiOn:
turn the Power Switch of the tool off, unplug
the tool from its electrical outlet, shut off the
water supply and safely discharge all residual
water pressure from the unit before assembling
or making any adjustments to the tool.
Check the Inlet Strainer for any blockage, including
packaging debris. The Pressure Washer may
be shipped with a plastic plug in the Inlet.
note: For additional information regarding the parts
listed in the following pages, refer to Parts List and
Assembly Diagram on page 14. Some of the following
assembly steps may have been performed at the factory.
Components
instructions for Putting into use
note: Check for and remove any shipping plugs from the Water Supply Inlet and Pressure Hose Outlet on the
front of the machine.
Handle
Power
Switch
Soap Dispenser
High Pressure
Hose
Pressure Hose Outlet
Spray Gun
Extension
Nozzle
Body
Water Supply
Inlet
(on back)