Troubleshooting guide replacement parts, Maintenance – Hamilton Beach 1G901 User Manual

Page 8

Advertising
background image

Troubleshooting Guide

Replacement Parts

Caring for the Blender

Problem . . .

Solution . . .

Blender fails to start
or stops while it is
running and cannot
be restarted

• Check to see if unit is securely plugged into an electric outlet.

• Check to see if the fuse for the electric outlet has blown or if a

circuit breaker has tripped.

Maintenance

Unplug the blender and remove the container from the base, and then inspect the container and
cutter unit assembly for wear, nicks, and broken or loose blades. Replace if necessary. If the
cutter assembly blades are loose, discontinue use immediately and replace the cutter assembly.
Do not attempt to repair or tighten the cutter assembly. See “Replacement Parts” below.

Unplug the blender, and then inspect the power cord insulation and power plug for cracks.
Refer to “Requesting Assistance or Service” for repair or replacement.

Replace the container and cutter unit assembly at least once a year. See “Replacement Parts”
below.

1G901

1 container

6126-901

1G908

1 container

6126-908

1G909

1 container

6126-909

1G910

1 container

6126-910

1G918

1 container

98000

1G919

1 container

98100

ALL

Cutter unit assembly

99100

Model

Part Description

Part Number

Inspect the blender and its various parts and replace as follows:

Daily

Weekly

Yearly

Ingredients will not mix
properly

• Check to see if enough liquid has been added to the ingredients. Mixture should

be fluid and free-running at all times.

• Solid pieces are too large. Pieces should not exceed 1

″ (2.5 cm) cubes.

• Container is too full. Do not fill past highest graduation marking.

• Cutter unit blades are not sharp or are damaged. Inspect container and cutter

assembly daily. Replace container and cutter assembly at least every 12 months
or sooner if cutter assembly appears worn or damaged.

• Check to see if cutter unit assembly is installed properly.

• Select speed (on some models) to create a fluid blend.

Refer to “Requesting Assistance or Service” to order parts below.

840111501-EN

261 Yadkin Road

Southern Pines, NC 28387

05/03

Advertising