Selecting print intensity, Setting print intensity – HP T3304 User Manual
Page 33
USER CONFIG
PRINTER CONTROL
OFFLINE
IGP/PGL
USER CONFIG
PAPER CONTROL
PRINTER CONTROL
Media Handling
PRINTER CONTROL
Print Intensity
Print Intensity
0*
Print Intensity
–10
Print Intensity
0*
Print Intensity
10
Print Intensity
–3
ONLINE
IGP/PGL
Setting Print Intensity
25
Operator’s Guide
The PRINT INTENSITY adjustment is used
to balance a new printhead, so that it prints
at the same level of darkness as did the
previous head. You can specify intensity
values from –10 through +10. The factory
default setting is 0.
1
Press ON LINE/PAUSE to place the
printer in the off line mode.
2
Press
to enter the configuration
menus.
3
Press
to reach the printer control
menu.
4
Press
to enter the printer control
menu.
5
Press
to reach the print
intensity menu.
6
Press
to enter the print intensity
menu.
7
Press
to select the desired
value.
8
Press ENTER to select the setting.
9
Press ON LINE/PAUSE to place the
printer in the on line mode.