Harbor Freight Tools 98480 - Manual

InstructIons and precautIons
distributed exclusively by Harbor Freight tools ® .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
saVe tHese InstructIons. read all
precautIons and InstructIons.
Copyright © 2008 by Harbor Freight Tools ® . All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
unpackIng
When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this document
as soon as possible.
Important saFetY
InFormatIon
assembly precautions
Assemble only according to these instruc- 1.
tions. Improper assembly can create haz-
ards.
Wear ANSI-approved safety goggles and
2.
heavy-duty work gloves during assembly.
Keep assembly area clean and well lit.
3.
Keep bystanders out of the area during as- 4.
sembly.
Do not assemble when tired or when under
5.
the influence of drugs or medication.
use precautions
This product is not a toy. Do not allow chil- 1.
dren to play with it.
Use for intended purpose(s) only.
2.
Inspect before use; do not use if loose or 3.
damaged.
Only use in accordance with State, local,
4.
Federal and D.O.T. laws and regulations.
Disconnect vehicle battery negative connec-
5.
tion before installation.
Positive and negative connections can not
6.
touch. If you are unsure of how to install this
product safely then have a qualified mechan-
ic install the gauge for you.
Insulate connections to prevent fire.
7.
Maintain product labels and nameplates. 8.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
2-1/16” led
tacHometer
98480