Harbor Freight Tools 42977 User Manual
Page 2
SPECIFICATIONS
FEATURES
1.
This sturdy steel cabinet provides a strong, vibration resistand stand for drill / mill machines.
2.
The machine is positioned at a convenient level for standing operation.
3.
Cabinet construction provides secure storage space for machine tools, equipment and accessories.
4.
Pre-drilled base flanges are provided for bolt-down attachment to the floor.
5.
Top drilled for semi-permanent attachent of drill / mill machine.
6.
Ideally suited for mounting model # 42976 Drill / Mill Machine.
SAFETY WARNING & CAUTIONS
1.
Never operate machinery on this stand unless the stand is firmly and permanently attached to a hard,
level, floor which is capable of supporting the weight of the stand, the machine, and any workpieces
which will be placed on it.
2.
Never operate machinery on this stand unless the machine is firmly and permanently attached to the
stand.
3.
This stand is primarily steel construction, and will conduct electricity. Never allow any electrical cord,
power supply, control or attachment to be attached to this stand unless it is insulated to prevent
electrical transmission.
4.
Be sure to close and secure the cabinet door in a closed position before operating any machine attached
to or mounted on this stand.
5.
Follow all safety warnings and precautions provided by the manufacturer or supplier of all machinery or
tools used in conjunction with this stand.
Page 2 SKU # 42977
SAVE THIS MANUAL
You will need the manual for the safety warnings and cautions, assembly instructions, operating procedures,
maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this manual.
Write the invoice number on the inside of the front cover. Keep both this manual and your invoice in a safe,
dry place for future reference.
NOTICE
The Warnings, Cautions, and Instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
Construction: 6 Gauge Steel, painted
(4) flanges with bolt-down holes
Net Weight:
38.58 Lbs.
Overall Dimensions: 17.4” L x 12. 09” W x 37.8” H
#42977 DRILL / MILL MACHINE STAND