Figure 2. upstream port and power connector – Hawking Technology H-DS20L User Manual
Page 8
Figure 2. Upstream Port and Power Connector
Connect to
power adaptor
Connect to PC (I)
Connect the power adapter and plug it into the back of the docking station.
Find an unused electrical outlet and plug it in the power adapter.
Plug the flat end (A plug) of the USB cable into a free USB port on your PC.
Plug the square end (B plug) of the USB cable into the USB upstream connector
located on the back of the docking station.
At this point, Windows will automatically find the docking station and start installing
its drivers. Windows will prompt you for the software. See the next section for
details on how to install the software.
If you are not sure what version of Windows you are running, click on “Start”,
“Settings”, “Control Panel”, then double-click on “System.” An applet will appear and
provide you with your system’s information.
8