HONDA EU1000i - Manual (Page 22)

20
AC OPERATION
OUTPUT INDICATOR
LIGHT (GREEN)
OVERLOAD INDICATOR
LIGHT (RED)
Most motorized appliances require more than their rated wattage for
startup.
Plug in the appliance.
Before connecting an appliance to the generator, make sure that it is in
good order and that its electrical rating does not exceed that of the
generator. Then start the generator and connect the appliance power
cord.
Determine if the cause is a short circuit in a connected appliance or an
overload. Correct the problem and restart the generator.
If the generator is overloaded (in excess of 1,000 VA), or if there is a
short circuit in a connected appliance, the overload indicator light (red)
will go ON. The overload indicator light (red) will stay ON, and after
about four seconds, current to the connected appliance(s) will shut off,
and the output indicator light (green) will go OFF. Stop the engine and
investigate the problem.
When an electric motor is started, the overload indicator light (red)
may come on. This is normal if the overload indicator light (red) goes
off after about four (4) seconds. If the overload indicator light (red)
stays on, consult your Honda generator dealer.
Start the engine and make sure the output indicator light (green)
comes on (see page
).
1.
2.
33
05/12/26 17:14:50 31ZT3604_021