HoMedics DIGITAL GLASS SCALE IB-SC405C - Manual (Page 3)

2
Thank you for your HoMedics Digital Glass Scale purchase. This, like the entire
HoMedics product line, is built with high-quality craftsmanship to provide years of
dependable service. We hope you will find it to be the finest product of its kind.
First Time Setup
1. This scale operates on two lithium CR2032 batteries (pre-installed). There is a red
strip under the lithium batteries to prevent battery drain in shipping. Remove the red
strip before continuing with these instructions.
2. Some models have a static cling label on the lens to prevent scratching. Remove
before use.
3. Set the “LB/KG/ST” unit of measure button located on the back of the scale for
pounds, kilograms or stones.
Note: The switch is pre-set to pounds.
4. The scale needs to be initialized before first use or after battery replacement.
Press lightly on the scale platform. The display will turn on, then show “0.0” and
automatically turn off. The scale is now ready for use.
Note: The scale may need to be initialized if it is moved or bumped.
General Operation
1. Place the scale on a flat, hard surface. Carpeted or uneven floors may affect
accuracy.
2. Step on the scale positioning your feet evenly on the scale platform (Figure 1).
Stand still while the scale measures your weight.
3. When your weight stabilizes, the display will flash, and then show your weight. The
weight reading will show for a few seconds. Then the display will return to “0.0” and
turn off to conserve the battery.
127.
0
LBS
Figure 1