Maintenance and servicing, Cleaning, maintenance, and lubrication, Please read the following carefully – Harbor Freight Tools 65410 User Manual
Page 10
SKU 65410
For technical questions, please call 1-800-444-3353.
Page 10
mainTenance and
serVicing
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
To PreVenT
serious injurY
From accidenTal
oPeraTion:
Turn the Power switch of the
tool to its “oFF” position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
To PreVenT serious
injurY From Tool
Failure:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning, maintenance, and
lubrication
BeFore eacH use,
1.
inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
aFTer use,
2.
clean external surfaces
of the tool with clean cloth.
3.
warning! if the supply cord of
this power tool is damaged, it must
be replaced only by a qualified
service technician.
Please read THe Following
careFullY
THE MANUFACTURER AND/OR DISTRIBUTOR
hAS PRovIDED thE PARtS LISt AND
ASSEMbLy DIAgRAM IN thIS MANUAL AS
A REfERENCE tooL oNLy. NEIthER thE
MANUFACTURER OR DISTRIBUTOR MAKES
ANY REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE OR SHE
IS qUALIfIED to MAkE ANy REPAIRS to thE
PRoDUCt, oR thAt hE oR ShE IS qUALIfIED
to REPLACE ANy PARtS of thE PRoDUCt.
IN FACT, THE MANUFACTURER AND/OR
DIStRIbUtoR ExPRESSLy StAtES thAt
ALL REPAIRS AND PARtS REPLACEMENtS
ShoULD bE UNDERtAkEN by CERtIfIED
AND LICENSED tEChNICIANS, AND Not by
thE bUyER. thE bUyER ASSUMES ALL RISk
AND LIAbILIty ARISINg oUt of hIS oR hER
REPAIRS to thE oRIgINAL PRoDUCt oR
REPLACEMENt PARtS thEREto, oR ARISINg
oUt of hIS oR hER INStALLAtIoN of
REPLACEMENt PARtS thEREto.