Hitachi V-21W - Manual (Page 24)

13
Lens installation
1. Raise the lens lever and remove the mount cap.
2. Align the lens center mark with the indent at the
upper part of the lens mount and install the lens
3. Lower the lens lever to secure the lens.
4. Engage the cable with the cable clamp and
connect it to the lens connector.
Refer to the lens instructions when using the lens.
Notes:
The following adjustments may be required according
to the type of lens.
1 Lens flangeback
2 Lens auto iris speed
3 Lens white shading (with camera)