HP S20 - Manual (Page 15)

http://www.photosmart.com 13
Setting the Photo Scanner for the Photographic Format
The next step in scanning photographs is to set the S20 photo scanner for the format of
the photograph you will scan. To do this, you will use the Photo Format button on the
photo scanner’s front panel. The Photo Format button sets the photo insertion slot so
it will accept the photographic format — mounted film, film strip, or print — that you
will scan.
The photo scanner has three icons on its front panel which correspond to the three
photographic formats: the mounted film icon, the film strip icon, and the print icon.
Below the icons is a row of three indicator lights.
To set the photo scanner for the correct photographic format, press the Photo Format
button until the indicator light is blinking under the icon for your photographic format.
As shown on the next page, the size of the photo insertion slot changes accordingly to
accommodate the photographic format you choose.
print icon
film strip icon
mounted film icon
photographic format
indicator lights
photo insertion slot
Photo Format button