Harman-Kardon AVR 155 - Manual (Page 2)

2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
4 Unpacking
5 Front Panel Controls
7 Rear Panel Connections
9 Main Remote Control Functions
13 Installation and Connections
13 Audio Connections
13 Video Connections
14 HDMI Connections
14 SCART A/V Connections
15 Power Connections
16 Speaker Selection
16 Speaker Placement
17 System Configuration
17 First Turn On
17 Using the On-Screen Display
17 System Setup
18 Input Setup
19 Surround Setup
19 Night Mode Settings
20 Configuring the Surround Off
(Stereo) Modes
21 Automated Speaker Setup Using EzSet/EQ
23 Manual Setup
23 Speaker Setup
26 Delay Settings
27 Output Level Adjustment
30 Operation
30 Surround Mode Chart
32 Basic Operation
32 Source Selection
32 6-Channel Direct Input
32 Controls and Use of Headphones
33 Surround Mode Selection
33 Digital Audio Playback
33 Dolby Digital
33 DTS
34 PCM Audio Playback
34 Selecting a Digital Source
34 Digital Bitstream Indicators
34 Surround mode Types
35 Surround Mode Post Processing
35 PCM Playback Indications
35 Speaker/Channel Indicators
36 Night Mode
37 Tape Recording
37 Output Level Adjustment
With Source Signals
38 Dim function
38 Memory backup
39 System Setup
39 Front Panel Display Fade
39 Turn-On Volume Level
39 Semi-OSD Settings
40 Full-OSD Time Out Adjustment
40 Default Surround Mode
40 Full-OSD Background Color
41 Tuner Operation
41 Basic Tuner Operation
41 Station Selection
41 Preset Tuning
42 RDS Operation
42 RDS Tuning
42 RDS Display Options
42 Program Search (PTY)
43 Programming the Remote
43 Programming the Remote with Codes
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
1 – (number in a square) indicates a specific front-panel control
0 – (number in a circle) indicates a rear-panel connection
0 – (number in an oval) indicates a button or indicator on the remote
The appearance of the text or cursor for your receiver’s on-screen menus may vary slightly from the
illustrations in this manual. Whether the text appears in all uppercase or upper- and lowercase
characters, performance and operation remain the same.
Declaration of Conformity
We, Harman Consumer Group, Inc.
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product
described in this owner’s manual is in compliance
with technical standards:
EN 55013:2001 + A1:2003
EN 55020:2002 + A1:2003
EN 61000-3-2:2000
EN 61000-3-3:1995 + A1:2001
EN 60065:2002
Jurjen Amsterdam
Harman Consumer Group, Inc.
02/08
43 Direct Code Entry
43 Auto Search Method
43 Code Readout
44 Macro Programming
44 Programmed Device Functions
44 Volume Punch-Through
45 Channel Control Punch-Through
45 Transport Control Punch-Through
45 Resetting the Remote Memory
46 Function List
48 Troubleshooting Guide
48 Processor Reset
49 Technical Specifications
50 Appendix - Settings Worksheet