Holux M-1200 - Manual (Page 3)

4. Mini GPS viewer
<Warning>
Do not place the
M-1200 under strong sunlight for a long time. Do not place it in
a high-temperature environment, or near heat radiating devices such as a stove
or radiator. Doing so will cause the device to breakdown and to function
unstably.
- For further information, please read the user’s manual in the supplied CD.
- M-1200 PASSKEY – 0000
(For security, some PDAs will prompt users for the M-1200 Passkey)
z When the GPS connection is working normally, the
status lamp indicates the status by a flash 1 time/1
sec.
z You can install the Mini GPS viewer program from the
supplied CD to check current positioning and satellite
signal reception.
z Enable the Mini GPS viewer, set the Baud rate to
38400, and press Scan for automatic scanning. Once
you find the correct Com Port, choose GPS Status to
start viewing.
z Refer to the “Software Installation” section for details if
you have any difficulty with installation and use.