Hitachi 5000 - Manual (Page 98)

- 6-19 -
Chapter 6
Other settings
Equipment settings
3 To set the time server, from the clock menu,
Select "2. Time server" using the keys of the key,
then confirm with the key.
This command displays the setting contents.
To change a setting, select “edit” using the key
For "Auto time", select "Enabled" or "Disabled".
For NTP server1 and NTP server2, enter the IP address of the NTP server used.
Finally, save with the key.
4 To set the time zone from the clock menu,
Select "3. Time zone" using the keys of the key,
then confirm with the key..
select the time offset value, then finally save with the key.
For use in Japan, set to GMT+09:00.