HP DB-102 - Manual (Page 3)

SCOTTY WOOD FURNACE – INSTRUCTION MANUAL
Scotty Oct-06 3
KERR SCOTTY Wood Furnace Model DB-102
Certified by the Canadian Standards Association
Manufactured by: Parrsboro Metal Fabricators Ltd.
P.O. Box 637, Crossroads
12118, Highway 209
Parrsboro, Nova Scotia, Canada
B0M 1S0
SPECIFICATIONS
Length 46 1/2”
Width 22 1/2”
Height 43”
Shipping Weight 344 lb
Fire Box 1/8”plate Length 27 1/2”
Diameter 18”
Secondary Heat Exchanger 14 gauge steel
Fire Box Door Cast Iron 12” x 12”
Warm Air Plenum 29” x 20 3/4”
Return Air Plenum 14 ½” x 20 3/4”
Air Filter Size 16” x 20” x 1”
Blower Size G9 – 10
Blower Motor 1/4 hp
CFM 1000 (Required)
Smoke Pipe 7” Inside Diameter
Floor to smoke pipe center 36”
Output (max) 70,000 Btu/h
Fuel Wood 24” logs
Electrical Rating Volts 120, Cycles 60, Amps 15
NOTE – Keep this manual in a safe place for future reference. Follow manual carefully
for the correct way to install and operate this unit.
CAUTION – Do not fire this unit until operating instructions have been read and fully
understood.
INSTALL WOOD FURNACE ONLY ON A FURNACE DUCT SYSTEM AND CHIMNEY
THAT ARE IN GOOD CONDITION AND APPROVED FOR USE.
SAVE THESE INSTRUCTIONS