Harbor Freight Tools 94331 - Manual (Page 2)

Page 2 SKU 94331
Specifications
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tools, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product! Follow all safety warnings and in-
structions provided by the manufacturers of the router being used.
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use in damp or wet locations. Don’t expose
to rain. Keep work area well lighted. Do not use electrically powered tools in the
presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it
was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
Material Molded phenolic plastic, steel accessories.
Large Pop Out Ring 4-1/16” OD x 2-9/16” ID
Guide Pin 1-3/8” L x 1/4” DIA. (pin) x 3/8” DIA. (shoulder)
Mounting Screws 6MM x 1.00, 15/64” long
Save This Manual
Main Opening 3-7/8” inside demension
Dimensions 12” x 9” x 23/64 thick
Small Pop Out Ring 2-7/8” OD x 1-1/4” ID
Hex Key 3mm