Philips GC3106 - Manual (Page 8)

 If the temperature light goes on after you have moved the iron, wait
for it to go out before you start ironing.
Note: If the temperature light does not go on after you move the iron, the
soleplate still has the right temperature and the iron is ready for use.
Cleaning and maintenance
Cleaning
1 Set the steam control to position 0, remove the plug from the wall
socket and let the iron cool down.
 Wipe flakes and any other deposits off the soleplate with a damp
cloth and a non-abrasive (liquid) cleaning agent.
To keep the soleplate smooth, avoid hard contact with metal objects.
Never use a scouring pad, vinegar or other chemicals to clean the
soleplate.
3 Clean the upper part of the iron with a damp cloth.
4 Regularly rinse the water tank with water. Empty the water tank
after cleaning.
Calc-Clean function
You can use the Calc-Clean function to remove scale and impurities.
Use the Calc-Clean function once every two weeks. If the water in your
area is very hard (i.e. when flakes come out of the soleplate during ironing),
use the Calc-Clean function more frequently.
1 Set the steam control to position 0, remove the plug from the wall
socket and let the iron cool down.
 Fill the water tank to the maximum level.
Do not pour vinegar or other descaling agents in the water tank.
3 Set the temperature dial to the maximum temperature.
4 Put the mains plug in an earthed wall socket.
5 Unplug the iron when the temperature light goes out.
6 Hold the iron over the sink, press and hold the Calc-Clean button
and gently shake the iron to and fro.
Steam and boiling water come out of the soleplate. Impurities and
flakes (if any) are flushed out.
7 Release the Calc-Clean button when all the water in the tank has
been used up.
8 Repeat the Calc-Clean process if the iron still contains a lot of
impurities.
after the Calc-Clean process
1 Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
 Unplug the iron when the temperature light goes out.
,
EnGlISh
8