Philips HI570 - Manual (Page 9)

Setting the temperature
C
1 Put the iron on the iron stand.
C
2 Set the required ironing temperature by turning the
temperature dial to the appropriate position (see section 'Tips'
for extra information).
Check the laundry care label for the required ironing temperature:
C
3 Put the mains plug in an earthed wall socket.The temperature
light goes on to indicate that the iron is heating up.
◗ The iron is hot enough when the temperature light goes out.
◗ During ironing the temperature light goes on from time to time.
This indicates that the iron is heating up to the right temperature.
◗ If you have been ironing at a high temperature and subsequently
set the temperature dial to a lower setting, wait until the
temperature light goes on again before you continue ironing.This
will prevent damage to your fabrics.
◗ Some parts of the iron have been lightly greased.This may cause
the iron to give off some smoke when you switch it on for the
first time.After a short while, however, this will cease.
ENGLISH 9
LINEN HILO
SILK SEDA
NYLO N NILON
WOOL LANA
COTT ON ALGO DON
M A X M IN
Steam setting
0 (see 'Ironing
without steam')
1-2
3-6
Temperature
setting
1
2
3 to MAX
Type of fabric
Synthetic fabrics (e.g.
acetate, acrylic,
viscose, polyamide,
polyester) and silk
Wool
Cotton, linen
Please note that Z
on the label means
that the article
cannot be ironed.
Symbol on laundry
care label
B
C
D
Z