Horizon Fitness ELITE 5.1T HRC Entertainment - Manual (Page 8)

LEVELING
The treadmill should be level for optimum use. Once you have placed the treadmill
where you intend to use it, raise or lower the adjustable levelers located on the treadmill
base frame. Once you have leveled the treadmill, lock the levelers in place by tightening
the nuts against the frame. To assure the treadmill is level, a carpenter’s level is
recommended.
TURN POWER ON
Make sure that your treadmill is properly connected to a power outlet. The on/off switch
is located next to the power cord. Flip this switch to the ‘on’ position, so that the switch is
lit. You will hear a beep and the console will light up.
SAFETY KEY
Your treadmill will not start unless the safety key is placed on the safety key holder. Attach
the clip end securely to your clothing. This safety key is designed to cut the power to the
treadmill if you should fall. NEVER USE THE TREADMILL WITHOUT SECURING THE
SAFETY KEY CLIP TO YOUR CLOTHING. PULL ON THE SAFETY KEY CLIP FIRST TO
MAKE SURE IT WILL NOT COME OFF YOUR CLOTHING.
DO NOT STAND ON THE BELT
While you are preparing to use the treadmill, do not stand on the belt. Place your feet on
the side rails before starting the treadmill. Start walking on the belt only after the belt has
begun to move. Never start the treadmill at a fast running speed and attempt to jump on!
7