Hampton Direct 52" Ceiling Fan 171-348 - Manual (Page 10)

6.
SUPPLY CIRCUIT
BLACK WHITE
BLACK BLUE
GREEN WHITE
Step 1 Connect the fan supply (black) wire
and light supply (blue) wire to the black
household supply wire as shown in Figure 12.
Step 2. Connect the neutral fan (white) wire to
the white neutral household wire.
Step 3 Connect the two green fan ground
wires, located on the mounting plate and
motor, to the household ground wire.
Step 4 After connecting the wires, spread
them apart so that the green and white wires
are on one side of the outlet box and the black
wire is on the other side.
Step 5 Turn the connecting nuts upward and
push the wiring into the outlet box.
Making the Electrical
Connections
REMEMBER to disconnect the power. If you
feel that you do not have enough electrical
wiring knowledge or experience, have your
fan installed by a licensed electrician.
Follow the steps below to connect the fan to
your household wiring. Use the wire
connecting nuts supplied with your fan.
Secure the connectors with electrical tape.
Make sure there are no loose strands or
connections.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT USE A WALL MOUNTED
SOLID STATE SPEED CONTROL WITH THIS
FAN. IT WILL PERMANENTLY DAMAGE THE
ELECTRONIC CIRCUITRY.
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
Figure 12
Figure 11
Hook