Havis-Shields Heavy Duty Trak Mount 2007-2008 Ford Expedition C-TM-EXPD-1 - Manual

C-TM-EXPD-1_INST_10-07
INSTALL INSTRUCTIONS C-TM-EXPD-1
HEAVY DUTY TRAK MOUNT
2007-2008 FORD EXPEDITION
TOOLS REQUIRED:
Metric socket set
Standard socket set
Impact wrench Tap and Die Set
7/16” wrench
HARDWARE:
QTY DESCRIPTION PART #
16 ¼-20 x 3/4” Hex Head Bolt GSM33001
8 ¼” Flat Washer GSM31005
8 ¼” Lock washer GSM31026
8 ¼” Serrated nut GSM30023
1 Front transmission hump bracket C-B48
1 Rear transmission hump bracket C-B49
2 ½” x 1” Thread cutting screws GSM33304
1 32” Trak Mount C-TM-32E
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
For product support, visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html
Front
Rear
Place front hump bracket
under front seat brackets
and attach with OEM seat
bolts
Attach rear bracket with
½” self threading bolts to
existing OEM holes under
floor mat