HP 6200C - Manual (Page 81)

4
HP PrecisionScan Pro User’s Guide 81
Adjusting images of
pictures
Book Contents Index
➮
➮
To correct the excess red in the picture below, the
indicator circle can be moved into the cyan area of
the
Color Wheel .
The hue of an image can be changed to create a
different effect.
Changing color saturation
You can adjust the amount of color in the image
with the
Saturation slider control in the Color
Adjustment tool. The higher the number in the
Saturation field, the more vivid the colors will be in
the image. A low number in the Saturation field
gives the image diluted colors.
The range for the
number in the
Saturation field is
0 to 150.
The result of the change to the saturation value
can be seen in the preview area.
Increasing the amount of color
Increase the number in the Saturation field to make
colors in the image more vivid:
■ Click on the right side of the slider,
– or –
■ type a higher number in the Saturation field, then
press Tab or Enter ,
– or –
■ click the UP spin button next to the Saturation
field.
Decreasing the amount of color
Decrease the number in the Saturation field to
dilute the color in the image:
moved
indicator circle
Very red Less red
moved
indicator circle
Original Special effect